This is a guideline with step by step process in installing ALCD2-11 Laundry Spark
- Before the installation, make sure that the laundry machine is turned off (i.e. unplugging the power cord)
- You have the key (if necessary) to open the service compartment where the computer board is
Step 1. Install the power connector of LaundrySpark, which is hidden on the bottom corner of the computer board.
Step 2. Plug in the coin mech. Try going around the machine look for the coin mech cable and unplug the coin mech from the computer.
Mind that there are 2 coin mech connectors, make sure that you plug the LaundrySpark connector where the coin mech was plugged in to.
Step 3. Connect the coin mech to your LaundrySpark meeting connector.
Step 4. If you want to keep using coins, just plug in the coin mech to the LaundrySpark.