This is a guideline with step by step process in installing DXCD2-20 Laundry Spark


  1. Before the installation, make sure that the laundry machine is turned off (i.e. unplugging the power cord)
  2. You have the key (if necessary) to open the service compartment where the computer board is.

 Step 1. Open the service compartment and unplug the coin acceptor and plug it to your harness accordingly.

Number 6 Harness has 3 different connectors:

Step 2.  Connect the Spark's harness computer plug to the computer board to where you unplugged the coin acceptor from.

Step 3. Plug in the LaundrySpark harness to the coin acceptor where you unplugged from.

Step 4. Connect the power to the capacitor.

Step 5. Note that the straight line indicates a negative sign;  make sure the black side of the power connector is on the negative line or you will risk damaging the machine.

And the setup should look like this:

Step 6.  Slide in the LaundrySpark inside behind the circuitry.