DXCD1-8

This is a guideline with step by step process in installing ALCD1-3 Laundry Spark

IMPORTANT REMINDERS:

  1. Before the installation, make sure that the laundry machine is turned off (i.e. unplugging the power cord)
  2. You have the key (if necessary) to open the service compartment where the computer board is.

Step 1.  Pull the power off from the computer board.

Step 2. Pull the coin output out.

Step 3. Connect the Laundry Spark harness into accordance to the photo below.

Step 4. If you want to continue accepting coins, plug in the coin acceptor into the adapter board on the LaundrySpark.