MTCD3-16

This is a guideline with step by step process in installing MTCD3-16-AM2 Laundry Spark

IMPORTANT REMINDERS:

  1. Before the installation, make sure that the laundry machine is turned off (i.e. unplugging the power cord)
  2. You have the key (if necessary) to open the service compartment where the computer board is

Step 1.  On the coin mech, loosen the screws so you can pull the wires out.

Step 2.Plug the same wires into the LaundrySpark with reference to the labels as shown. Make sure to loosen  the scew first before plugging in the wires. 

Step 3. Plug according to the color coding on which wire goes into which terminal connection.

Step 4. Put back the other end of the LaundrySpark from where you took them off.