ALCD6-29

This is a guideline with step by step process in installing ALCD6-29 Laundry Spark

IMPORTANT REMINDERS:

  1. Before the installation, make sure that the laundry machine is turned off (i.e. unplugging the power cord)
  2. You have the key (if necessary) to open the service compartment where the computer board is

 Step 1. From the service compartment, look for the adapter and unplug it.

If you look at the adapter it looks exactly the same with the harness 29

Step 2.  Plug in the harness 29 in which will be for the coin input. 

Step 3.  Take the 2 pin adapter to where the 2 pin connector is located


  Now you have the two connectors for the harness. 

Step 5. Take the other end of the adapter and plug into the Spark. Place it securely inside the compartment and close.