This is a guideline with step by step process in installing ALCSX-2 Laundry Spark

IMPORTANT REMINDERS:

  1. Before the installation, make sure that the laundry machine is turned off (i.e. unplugging the power cord)
  2. You have the key (if necessary) to open the service compartment where the computer board is.
Step 1. Locate the switch inside the service compartment which might require some unscrewing so you can have access.

 Step 2.Unplug the 2 terminals from the switch.

 Step 3. Connect the matching two (2) terminals from the LaundrySpark's harness to the two (2)  terminals that were removed from the switch (assure that both terminals are plugged).

Step 4. Connect the two (2) terminals that look like below to the switch if you are keeping the coin payment option for the users  (assure that both terminals are plugged).

Step 5. Connect the power plug from LaundrySpark (the  black six-pin connector) to the machine's control board's six black pin