This is a guideline with step by step process in installing ALCD2-10 Laundry Spark

IMPORTANT REMINDERS:

  1. Before the installation, make sure that the laundry machine is turned off (i.e. unplugging the power cord)
  2. You have the key (if necessary) to open the service compartment where the computer board is

Step 1. Connect the LaundrySpark power connection to the computer board, it is hidden on the bottom corner of the computer board (see below).

Step 2  Unplug the coin mech from the computer. 

Be aware that there are 2 coin mech connectors, make sure that you connect the LaundrySpark connector to where the coin mechanism was plugged in. 

Step 3. Connect the coin mechanism cable to the LaundrySpark meeting connector.

Step 4. If you want to keep using coins, just connect the coin mechanism cable to the LaundrySpark.