This is a guideline with step by step process in installing MTCD1-5 Laundry Spark

IMPORTANT REMINDERS:

  1. Before the installation, make sure that the laundry machine is turned off (i.e. unplugging the power cord)
  2. You have the key (if necessary) to open the service compartment where the computer board is

 Step 1.Unplug the coin-acceptor from the computer board.

 Step 2.Plug the coin mech into the Laundry Spark.

Step 3 Connect the Spark's harness to the computer board (make sure you plug it into the main coin input)