This is a guideline with step by step process in installing MTCD2-6 Laundry Spark

IMPORTANT REMINDERS:

  1. Before the installation, make sure that the laundry machine is turned off (i.e. unplugging the power cord)
  2. You have the key (if necessary) to open the service compartment where the computer board is

 Step 1.Unplug the coin acceptor from the computer board (make sure you remember the one you pulled the plug out of).

Number 6 Harness has 3 different connectors:

Step 2.  Connect the Spark's harness computer plug to the computer board to where you unplugged the coin acceptor from.

Step 3.  Plug the grounding wire to the computer board.

Step 4. Plug the harness  into the LaundrySpark .